- 2 -
LED indicator
LED
Color
Function
PWR
Green
Off: No Power supply.
Light: Indicates the switch has power.
LNK/ACT
Green
Off: No device is connected to the corresponding port.
Light: Indicates the link through that port is successfully
Established at 10/100Mbps.
Blink: Indicates that the Switch is actively sending or
Receiving data over that port.
PoE
Orange
Off: No PoE powered device (PD) connected.
Light: There is a PoE PD connected to be port, which
Supply power successfully.
Blink: Indicates port abnormal power supply.
Rear Panel
The rear panel of the PoE Switch indicates an AC inlet power socket, which accepts input power from 100 to
240V AC, 50/60HZ.
Power socket
Connect the female connector of the power cord here, and the male connector to the AC(Alternating Current)
power outlet. Please make sure the voltage of the power supply meets the requirement of the input voltage.
Grounding column
The switch already comes with lightning protection mechanism. You can also ground the switch through the PE
(Protecting Earth) cable of AC cord or with Ground Cable.
Installation the Switch
This part describes how to install your Ethernet Switch and make connections to it. Please follow the following
instructions in avoid of incorrect installation causing device damage and security threat.
