- 2 -
Installation
This part describes how to install the switch and make the connections. Please follow the instructions to avoid damages
and security problems.
Before cleaning the switch, unplug the power supply. Do not clean the switch with wet cloth or liquid
Do not place the switch near water or any damp area. Prevent water or moisture from entering into the chassis
Do not place the switch on an unstable place or desk. The switch might be damaged severely in case of fall
Ensure proper ventilation of the equipment and keep the ventilation vents free of obstructions
Make sure that the operating voltage is correct
Do not open the chassis while the switch is powered to avoid electrical shocks.
Desktop installation
Wall-mounted installation
Fix the switch on the wall with 2 screws
Turn ON the switch
When powered, the switch start automatically, the led lights up as follows:
-
the Power led lights up
-
the data led blink for one second (represents the system reset)
