Comelit 40797, Руководство пользователя, Страница: 22 / 48

16
3.5 Auto Scan Menu
AUTO SCAN MENU
SCAN: 1
TITLE: ==========
START POINT: 000.0 000.0
END
POINT: 000.0 000.0
SCAN DIR. : CW
SPEED: 07
SWAP: OFF
SAVE
EXIT
/ : move cursor up and down.
/ : move cursor left and right or select or change values.
: change character at TITLE:
/
ESC
: exit current menu.
3.5-1 Set Auto Scans
1. Move cursor to SCAN: and select scan number by using joystick.
2. To insert the Title of the Auto scan, move cursor to TITLE: and set proper
title by using joystick. If title is not selected, SCANxx will be displayed.
(xx : the recalled Scan number)
3. Move cursor to START POINT: and press IRIS OPEN or CTRL button
to move the position of the dome then the message “CONROL” displays
on the screen.
4. Move the dome to desired PAN starting point, Tilt point of Auto Scan range
and Zoom postion.
5. Press IRIS CLOSE or release CTRL button then the message of
“CONTROL” disappears on the screen. It is saved automatically.
6. Move cursor to END POINT: Move the dome to desired PAN end point
of Auto Scan range and set end position by pressing IRIS OPEN or
CTRL button. When the setting is completed, press IRIS CLOSE or
release CTRL button.
(Note. At this point, only PAN position will be adjustable.)
7. SCAN DIR. means Auto Scan Direction. CW is Clock Wise and CCW is
Counter Clock Wise.
8. SPEED is selectable from 1 to 10.