Comdial FX Series, Руководство пользователя

Страница: 25 / 40

7.3 Switching the Dialing Mode
•
If the local telephone service is pulse (rotary), convert to tone
while dialing as follows:
1. Press # at point in dialing sequence where conversion to tone is
required.
NOTE: You can program pulse/tone switching into memory keys by
pressing # at the proper location while you are storing
numbers.
7.4 Programming Your Telephone
•
To store an outside number as a speed dial number,
1. Lift handset.
2. Dial
✳ ✳
1.
3. Dial 1–0 to choose storage location.
4. Dial 01–16 to select line groups 1–16, or dial 00 to let system
select line.
5. Dial number to be stored (up to 16 digits long—include
✳
and
# if needed). To store hookflash in a number sequence, press
TAP; press HOLD to store pause (only if needed).
6. Press TRANSFER/CONFERENCE (IMPRESSION model)
or TAP (DigiTech model) to store number.
7. To store another number, repeat steps 3 through 6.
8. Repeat previous steps until all numbers are stored.
9. Hang up handset to end.
NOTE: Federal Communications Commission (FCC) requires that
when programming emergency numbers and making test calls
to emergency numbers, you do the following: (1) Remain on
the line and briefly explain to the dispatcher the reason for the
call; (2) always make such a test call during the off-peak
hours, such as early morning or late evening.
GCA70-227 Using The Other Features
SLPS Station User's Guide 7–3