Comdial DXP Impact Скачать руководство пользователя страница 74

Страница: 74 / 104

•

To turn on the message-waiting light (and a broken dial tone) at
an idle telephone,

1. Press INTERCOM.

2. Dial

✳

3. Dial extension number of station to be alerted. The

message-waiting light of called station will flash.

•

To turn off the message waiting light at a busy or idle station,

1. Press INTERCOM.

2. Dial

3. Dial extension number of station that was alerted. The

message-waiting light of called station will turn off.

•

To turn off the message-waiting light during message-delivering
conversation,

1. Press INTERCOM once if off-hook, twice if on-hook.

•

To receive a message at an alerted station,

1. Observe flashing message-waiting light or hear the broken dial

tone.

2. Press INTERCOM, then press HOLD. The station that left

message is called automatically.

NOTE: Only the person who sent the message and the person

receiving the message can turn the indicator off.

Sending And Receiving Non-Verbal Messages

GCA70–249

8 – 2 Non-LCD Reference Manual

Содержание DXP Impact









































































































Результаты поиска

Содержание DXP Impact

Отзывы:

Comdial DXP Impact, Справочное руководство, Страница: 74 / 104

Результаты поиска

Содержание DXP Impact

Отзывы: