ESC-2/FP Manual
3.
The (PROMPT) response is defined as: <LF><CR> > or HEX A, D, & 3E
ESC-2 Serial Remote Commands
Instruction Function
Response
! (NO <CR>)
ATTENTION
(PROMPT)
SVxxxx
SET OUTPUT VOLTAGE
(1)
(PROMPT)
SIxxx SET
CURRENT
LIMIT
(2)
(PROMPT)
D+ ENABLE
AUTO
DISCHARGE (PROMPT)
D-
DISABLE AUTO DISCHARGE
(PROMPT)
V+ ENABLE
AUTO
VOLTAGE REVERSAL
(PROMPT)
V-
DISABLE AUTO VOLTAGE REVERSAL
(PROMPT)
EV ENABLE
VOLTAGE
(PROMPT)
DV DISABLE
VOLTAGE
(PROMPT)
P+x.x
SET UPRAMP TIME
(3)
(PROMPT)
P-x.x
SET DOWNRAMP TIME
(4)
(PROMPT)
RV
READ VOLTAGE
xxxx (PROMPT)
RB
READ CENTER TAP VOLTAGE xSPxxx
(PROMPT)
R+
READ POSITIVE CURRENT
xxxx (PROMPT)
R-
READ NEGATIVE CURRENT
xxxx (PROMPT)
EE ENABLE
ECHO
(PROMPT)
DE DISABLE
ECHO
(PROMPT)
EX EXIT
NONE
# (NO <CR>)
EXIT
<CR><LF>BYE
To initialize serial communications a “!” character must first be transmitted to the ESC-2. The front panel will
display SR to indicate serial remote mode. An “H” character will display the HELP screen with all available
functions and commands.
NOTES:
1. The minimum output default is 50Vdc. Settings of less than 0050 will yield 0Vdc. Voltage changes are in
1Vdc increments.
2. The minimum current limit setting is 0.1mA.
3. The minimum ramp settings are 0.1 seconds.
4. Values less than 0.1 will default to 0.1 seconds.
8
System Specification
A. Output Capability
Description
Specifications
True floating bi-polar output:
Minimum path to chassis ground from any HV output terminal
>10 Meg ohm
Output to input isolation:
> 500 Meg ohm (based on standard 5 KV dc hi-pot tests)
Output voltage/current:
+/- 1000 VDC, 3mA maximum limit
Output stability:
0.1% or better of output from 0 to full load
Output ripple:
Less than 0.2% at 50k Hz operating frequency
Output linearity:
Better than 0.1% full scale
Output polarity reversal:
On command
Output voltage balance:
Better than 0.5% for matched loads
B. Input Requirements
Single 24 Volt dc, 1 Adc (2 amp surge capability for 2 seconds at start up).
© 2006 Comdel, Inc.
7
Содержание ESC-2/FP
Страница 16: ...19 2006 Comdel Inc ...