Press and hold the
Voice button
until you
hear the audio tone.
Speak a voice command
to the remote
while continuing to hold down the button.
Try one of the suggestions below. The
Status LED will be
solid blue
while you
speak your command.
Release the
Voice button
when your
command is complete. Look at the TV for
the results of your voice command.
Remote with Voice Control
Start
Using the list on the right, find the first
5-
digit code
for your TV manufacturer.
Press and hold the
Setup
button (about 3
seconds) until the
Status LED
changes
from
red to green
.
Enter the
first
5-digit code for your TV
manufacturer. The Status LED should
flash
green twice.
Verify that the code was accepted by using
your remote to adjust
volume
and turn the
TV
on and off.
A
B
C
D
Not working?
Try the second code listed. Still
not working? Visit
xfinity.com/voiceremote
for a
complete list of codes or use the My Account app
for mobile (iOS/Android) or X1.
A
B
C
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not used
in accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that which the receiver is connected.
• Consult the dealer or an experienced remote control
/TV technician for help.
• It is strongly recommended that the TV be plugged
into a separate wall outlet.
The user is cautioned that changes and modifications made
to this equipment without the approval of the manufacturer
could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
“Caution” : Exposure to Radio Frequency Radiation. Antenna
shall be mounted in such a manner to minimize the potential
for human contact during operation to avoid the possibility of
exceeding the FCC radio frequency exposure limit.
Radio Exposure Statement: This equipment complies with
the FCC radiation exposure limits set forth for devices
operating in an uncontrolled environment. This equipment
should be operated with a minimum distance of 2 cm
between the radiator and front of face. This equipment
should not be placed directly on the ear when the speaker
is active.
Control Your TV’s Power and Volume
4
Test Voice Control
5
Once your remote is paired with your set-top
box, you can use voice control.
FCC Compliance Statement
Not working?
Make sure you’re pressing the
Voice button while you speak into the remote,
and release it when complete.
WATCH
CNBC
FIND
The Voice
SHOW ME
all Eagles games
SHOW ME
all kids movies on HBO
RECORD
The Biggest Loser
LAUNCH
Pandora
GUIDE
WHAT SHOULD I WATCH?
WHAT’S ON NOW?
Need help ?
Visit xfinity.com/voiceremote
Use the My Account app
for Mobile (iOS/Android) or X1
Keep for future reference, but if you
decide to toss, please recycle.
Quick Start Guide v.1.0
1698397C Printed in China
If your code isn’t listed or you would
like to control an audio device, visit
xfinity.com/voiceremote
.
Popular Manufacturer Codes
LG
10178, 11265
Panasonic
10051, 10250
Samsung
10812, 10060
Sanyo
10154, 10159
Sony
10000, 11100
Sharp
10093, 10165
Toshiba
10156, 11156
Vizio
11758, 11756
