Comcast LT1550-E, Инструкция по эксплуатации

Страница: 38 / 48

LT1550-E
www.comcast-sa.com
ethcfg
This command configures the Ethernet parameters, including IP address,
subnet mask and gateway. You can refer to the help information for its using.
settrap
This command shows or modifies the aim host IP address list of the SNMP Trap,
IP address of 0.0.0.0 and 255.255.255.255 don’t exist. SNMP Trap does not
send to these two addresses.
community
This command configures the read-only group name and read-write group
name. “Group name” is the concept of SNMP agreement like the password.
Use the command “community ro” to configure the read -only, and
“community rw” for the read - write. For example, input “community rw
public”, “public” is the read -write group name. The group name for read-only
and read- write are both “public” as the equipment default setting from
factory.