CombiSteel 7518.0100, Руководство пользователя

Страница: 4 / 18

4
Using your new milkshaker

Remove the equipment from its packaging and inspection or if there is any damage.

Before use, clean the milk shaker cup with a damp cloth and soap.

Install beverage mixer on the counter near an outlet network.

Prepare the ingredients for mixing into the vessel.

When ready, turn on the mixer with the switch on / off.

Select the desired speed.

Place the milk shaker cup against the trigger switch located near the top of the shaft. The edge of cup can
reset on the ledge to hold the cup in place during mixing.

Allow the shaft mix the ingredients. The mixer will turn off when the cup apart from the switch activator.

When you finish using your beverage mixer, turn off and unplug the unit.
Cleaning instructions

For good product conservation clean the blender daily.

Turn off and unplug mixer.

Prepare the detergent and a cloth. Start at the top of your beverage mixer and continue down. DO NOT allow
water / disinfectant into the vents located on the side rear of the unit.

Pay special attention to cleaning the shaft. It's a good idea to use a small brush to remove agitator residues.

Dry the unit completely before using again.

The switch has two speed, we can choose what we like, please look at the photo.