4
www.combisteel.com
Preparation and power supply
Exclusive power socket
The power receptacle must have a reliable earth
connection.
No share on socket
Never let the appliance share the common socket
with other appliances, otherwise the cable becomes
hot and fire may occur.
Protect cables
Never break or damage the cables otherwise current
leakage and fire may occur.
No water flushing
Never give the appliance surface a flush otherwise
current leakage may occur.
Prevent from flammables and explosives
Never put any flammables or explosives inside the appliance such as ether,
gasoline, alcohol, adhesive and explosive. Never put dangerous products
nearby the appliance.
Installation and operation
Installation
Place the appliance on top of an even and safe surface which supports the weight of the appliance and is
not heat sensitive.
Not at any time should you place the appliance on an inflammable surface (such as table cloths, carpets,
etc.)
You must not position the appliance near open fireplaces, electric ovens, electric heaters or other heat
sources.
Position the appliance in such a way that the plug is easily accessible.
Operation
Before first use, clean the inner sides and the playing grids with a soft cloth and a mild cleaning agent.
Afterwards, dry the appliance thoroughly.
Remove the water bowl from the appliance. The water bowl is installed inside the appliance and then fill the
water bowl with water.
Connect the appliance to a single grounded power socket.
Set the temperature as required for respective food. You may adjust the desired temperature in the range
between 30 - 90°C.
The temperature inside of the hot display can be read from the front display.
Put the food in appropriate containers before displaying them inside the hot display and shut it by using the
sliding door.
Some of the appliance parts become very hot, always use safety gloves when placing or removing food.
The food is kept warm at the temperature set by you previously.
In order to place or remove food, you may open the door at the rear side.
Switch on the inner light when required using the light switch on the appliance.
Disconnect the appliance from the power socket when the appliance is not in use.
