CombiSteel 7455.0070, Руководство пользователя

Страница: 6 / 43

6
www.combisteel.com
3. Safety instructions
3.1 Proper use
7455.0070 is exclusively intended for cutting grilled meat. The 7455.0070 is designed for professional use in
catering and must not be operated by children. Only use the 7455.0070 with original accessories. Any other type
is hazardous and can result in serious injury.
CAUTION
Non-compliance with the following instructions can cause electric shock, fire and serious injury.

All instructions must be read.

Keep these instructions in a safe place.
3.2 Workplace

Keep your workplace clean and tidy.

Position the 7455.0070 a sufficient distance away from gas flames or other heat sources, in order to
prevent the casing or cable from melting.

Observe the hygiene regulations that are valid in your country.
3.3 Electrical safety
Unchanged power plugs and sockets reduce the risk of electric shock.

The power plug of the 7455.0070 must fit in the socket.

The power plug must not be changed in any way.
There is increased risk of electric shock when your body is earthed.

Avoid body contact with earthed surfaces, such as pipes, radiators, stoves and refrigerators.
Water permeating an electrical device increases the risk of electric shock.

Keep the 7455.0070 away from moisture.
Damaged or tangled cable increases the risk of electric shock.

Please do not use the power cable for purposes other than intended, in order to carry or hang up the
7455.0070 or for pulling the power plug out of the socket.

Keep the power cable away from heat, oil, sharp edges or moving device parts. Only have damaged
power cable replaced by manufacturer or authorized service technicians.
3.4 Safety of persons
WARNING
Cutting hazard!
The knife is very sharp.

Always work carefully. Observe the instructions.

Only use the knife with a correctly mounted knife protector and adjustment ring.

Do not use the 7455.0070 with a defective knife protector or a defective adjustment ring.

Remove defective parts.
A tool or spanner found in rotating device parts can lead to injury.

Remove the adjusting tools or spanner before switching on the 7455.070.

Remove the power plug from the socket before carrying out adjustments to the device, changing
accessories or putting the 7455.0070 away.