Combi Twin Sport, Инструкция по эксплуатации

Страница: 4 / 12

- 4 -
Attaching the Combi Shuttle Infant Seat
1. Recline stroller seat to the full recline position.
3. Insert Combi Shuttle infant carrier into left side of
stroller seat (while facing the stroller). Ensure bottom
of Infant Seat rests on stroller seat.
4. Press top and bottom of infant seat down into stroller
until it locks in place. Lift up gently on handle to ensure
seat is secure.
Removing Infant Seat
1. Pull red release lever on Combi Shuttle, while lifting up to release
from stroller.
3
WARNING
After installation, lift car seat to verify it is securely
locked onto the stroller.
Infant car seat MUST be attached to the stroller in
the rear facing position only.
2. While facing the stroller, attach car seat connectors to
left (outside) and middle armrest. Pull up on attachments
to ensure both connectors are secure.
2
2. Remove car seat connectors from stroller and store for future use.
WARNING - Pinch Hazard
Car seat connectors must NEVER be used
when seating position is being occupied
without the Shuttle infant seat.
When not in use, always remove and store
car seat connectors.