1. Place the crotch belt between the baby’s legs.
2. Insert both waist belt buckles into the middle plastic piece.
3. Attach each shoulder strap’s hook to the top of the
waist belt clips.
4. To re-adjust the harness as the child
grows re-thread the shoulder straps
to the higher slots (button-like holes)
located on the back of the seat.
5. To adjust the waist belt, loosen the
slack on both sides of each buckle.
COMBI International Corporation
•
189-199 Easy St.
•
Carol Stream, IL 60188
•
www.combi-intl.com
Customer Service 1-800-992-6624
•
10:00 a.m. - 5:00 p.m. Central Standard Time
•
Monday - Friday
- 4 -
Folding the Stroller
1. Remove all items from the basket.
2. Lock all front swivel wheels.
3. Make sure seat backs are in
the upright position.
4. Fold both canopies by lifting
up on the canopy levers.
5. Remove your player
from the back pocket
of the canopy.
6. While lifting up
the folding
levers on both
sides of the
handle, tilt the
stroller back
until it folds
together.
7. Fold together by
bringing the sides of
the handle together
until the canopies
face each other in
the middle.
8. Lock the folding latch to
hold the stroller together.
Using and Adjusting the 5-Point Harness
Avoid serious injury from falling or
sliding out. Always use waist belt.
Folding Latch
1
3
2
The stroller can be pulled behind
you as shown in diagram A or
carried over your shoulder as
shown in diagram B.
Using the Safety Cover
CAUTION
Before folding the stroller, unfasten and store the
safety cover under the seat. The stroller will not
fold with it attached.
Installing the Safety Cover
The safety cover can be used to fully enclose the front of the stroller when the
seats are in the full recline position.
1. Lift the seat cushion and pull safety cover out.
2. Place the safety cover over the guardrail and secure it with the velcro.
Velcro
