Twin Cosmo Instruction Manual 5
STROLLER ASSEMBLY
CombiUSA.com
ATTAChING ThE COMBI
®
ShUTTLE INFANT SEAT
WARNING:
After installation, lift car seat to verify it is securely locked onto the stroller. Infant car seat MUST be
attached to the stroller in the rear facing position only.
1.
Insert Combi Shuttle infant carrier into
left side of stroller seat (while facing the
stroller). Ensure bottom of Infant Seat
rests on stroller seat.
2.
Press top and bottom of infant seat down into stroller
until it locks in place.
3.
Find the car seat attachment straps located under
the seat pad. Route car seat attachment straps through
the Shuttle
™
vehicle belt path. (Refer to the Shuttle
™
instruction manual for additional information.) Buckle
the car seat attachment straps. Lift up gently on handle
to ensure seat is secure.
REMOVING INFANT SEAT
Pull red release lever on Combi Shuttle, while lifting up to release from stroller.
To Lock Swivels:
Make sure the lock lever is behind
the stroller frame; the lift both swivels lock levers up.
To Unlock Swivels:
Push both swivel lock levers
down.
To Lock Brakes:
Push both brake levers down.
To Unlock Brakes:
Lift both brake levers up.
USING ThE SWIVEL WhEELS
USING ThE BRAKES
CAUTION:
Push the stroller forward to ensure
that the brakes are properly engaged.
Содержание Twin Cosmo
Страница 11: ...Twin Cosmo Instruction Manual 11 CombiUSA com...