Assembling the Stroller
1. Remove stroller and rear wheel assem-
blies from the plastic bag.
2. Remove canopy by detaching rubber
bands.
3. Remove front wheel assemblies, guard-
rail and stroller handle from inside the
stroller.
4. Lift locking lever from stroller frame and
open stroller.
5. Grasp right and left steel tubes and snap
the stroller away from you to open.
6. Insert stroller handle into frame by press-
ing chrome buttons into the back of the
stroller frame. Push handle down until
the chrome buttons lock into both sides
of the handle.
7. While lifting up on gray tube (figure A),
attach long gray tabs from handle to the
round gray tabs on each side of stroller.
8. Secure the handle by lifting the folding
levers on each side of stroller until the
gray tabs lock into position.
Attaching & Removing the Front Swivel Wheels
Removing the Swivel Wheels
Press in the square button located at the
bottom of the wheel holder while pulling
the assembly off of the swivel shaft.
Release Button
1. Turn stroller over and remove
packaging material from stroller
frame.
2. Insert the front wheels onto
the stroller leg. Make sure the
swivel wheel lever is behind the
stroller leg and released. You
will hear a click when the wheel
is properly attached.
- 3 -
(figure A)
4
6
5