13
Installing and Removing Seat Back:
To install seat back:
•
Place Booster Car Seat base on floor or firm surface.
•
Holding seat back slightly reclined, place tabs at bottom of seat back
into slots of seat base
(fig. a)
.
•
Rotate seat back upright .
•
Press down firmly until wings on side of seat back touch arms
on seat base .
To remove seat back:
•
Place High Back Booster Car Seat on the floor or other firm surface.
•
While holding the base down, pull the seat back straight up until it stops,
then rotate seat back into a reclined position and lift out.
(fig. a)
Section 9 - Seat Back Assembly
Base
Seat
Back
Wings
2
2
3
Top Of
Arms
3
1
1
8500A-05/04 (EN) 052004.qxd 5/20/04 2:17 PM Page 14
