- 5 -
Trade name and trademarks of Graco
®
, Century
®
, Evenflo
®
and Cosco
®
are the property of their respective owners and no endorsement
of or approval by them is intended or implied. All Combi Flash strollers are compatible with specified models of the Graco
®
, Century
®
, and
Evenflo
®
infant car seat/carrier models as of the date this printing was prepared.
Copyright 2007 Combi USA Inc.
Attaching/releasing Infant Seat
1. Unbuckle the attachment strap and lay over the right
and left side of the stroller frame.
2. Hook the infant seat onto front rail of the stroller. The
foot end of infant car seat/carrier will rest on the two
L-shaped brackets.
Remove the infant car seat/carrier by reversing the
above steps. See your infant car seat manufacturer's
instructions for proper release lever operation.
rEMovINg tHE INFANt SEAt/CArrIEr
3. Bring the infant seat attachment straps through the
seat belt guides in the infant car seat/carrier and fas-
ten the buckle. To loosen, tilt the buckle and pull up.
To tighen, pull the strap.
Note: Illustrations are for reference only and may not
represent the actual product.
WArNINg
Never use this product without routing infant seat attach-
ment straps through the seat belt guides securing the
attachment strap to the infant seat. Attachment strap
MUST be routed through the infant carriers seat belt
guides. If seat belt guides are covered you must uncover
them before routing the attachment strap.
WArNINg
The infant harness must be buckled correctly per your
manufacturer's instructions.
Combi tyro, Connection, Centre St, Centre dX, Centre
EX, graco Snugride, Evenflo Portabout, Chico KeyFit
WArNINg
Make sure you tighten the attachment strap before usage.
1
2
3