1. Remove stroller and wheel assemblies from the plastic bag.
2. Remove and discard both black rubber caps from stroller
frame.
3. Release locking latch by pulling latch away from stroller frame.
4. Grip the handle on each side with an under hand hold and
turn outward to open.
5. Lift up the handle
and snap the stroller
away from you. It
will open and lock
automatically
into position.
note: Illustrations
are for reference only
and may not represent
the actual product.
Attaching & removing the Front Swivel Wheels
removing the Swivel Wheels
Press in the rectangular button located at
the bottom of the wheel holder while pull-
ing the assembly off of the swivel shaft.
Release Button
1. Turn stroller over and remove
packaging material from stroller
frame.
2. Insert the front wheels onto
the stroller leg. Make sure the
swivel wheel lever is behind the
stroller leg and released. You
will hear a click when the wheel
is properly attached.
- 3 -
Assembling the Stroller
1. Locate the small opening on each rear
wheel assembly.
2. Locate the small chrome pin on each rear stroller leg.
Attaching and removing the rear Wheels
3. Insert the leg into the
wheel assembly until the
small chrome pin locks
into the opening.
to remove the wheels,
push in small chrome
pin and pull wheels off the frame.
