- 6 -
Removing/Attaching the Seat Cushion
CAUTION
If seat cushion is ripped or torn,
do not use.
Do not use the stroller without
the seat cushion.
Removing
1. Press levers down on
right and left harness
hooks to detach hooks
from buckle tongues.
2. Press buckle button
down (with Combi logo)
and detach buckle
tongues from buckle.
3. Remove shoulder pads
from harness by pulling
over harness
hooks.
Removing the Basket
CAUTION
Do not place more than 11 lbs. in the basket.
Remove all items from the basket before folding the stroller.
1. Unhook and unloop the front straps of the basket
from the front of the seat frame.
2. Unsnap the basket from its frame.
(Snaps are located on the basket near the rear
legs.)
3. Slide the basket off the basket frame.
Front of
Stroller
Attaching
1. Attach Velcro at the bottom
of the seat pad to Velcro on
the stroller base.
2. Pull top of seat pad forward;
the seat pad can rest on the
front guard rail.
3. Insert buckle strap into slot at
the bottom back of the seat
pad.
4. Pull top of seat pad forward to
detach Velcro..
5. Pull all the harness straps
through the top and side slots in
cover.
6. Unzip zipper at the base of the
seat cover.
7. Pull bottom of seat pad upward
to detach Velcro
4. Locate zipper on the back
of the seat pad and locate
the zipper in the seat bite
of the stroller. (The boot
also has a zipper; do not
use the boot zipper to
attach the cover)
Zip seat pad to stroller.
5. Insert harness straps with
hooks and harness straps
with buckle tongues thru
slots on back of seat pad.
6. Attach Velcro on top of seat
pad to stroller.
Seat Base
Velcro
Using the Combi Connection Attachments
1. After removing the Guardrail attach the Combi
Connection attachments by slipping them over the
armrest pins until you hear the plastic tabs click into
position. Gently pull up on attachment,
to be sure it is secure.
2. Attach guardrail. Pull up on guardrail
to ensure it is secure.
3. Recline the backrest to the middle position or lower.
ATTACHING THE COMBI CONNECTION ATTACHMENTS
4. Attach Combi Connection infant seat to attachments
and press down until seat locks in place. Infant car
seat MUST be secured to stroller.
After installtion, lift
car seat to verify it is securely locked onto stroller.
Содержание City Savvy 2460 Series
Страница 11: ......