
1
2
3
4
8
7
5
6
Remove the two screws from the bottom cover
of the base.
Place the bottom cover on the base.
Confirm points of installation
Screw in female type anchor bolts.
Bottom cover
514mm
Please prepare the following before installation:
Make sure 100mm or more of
space is available on either side.
φ
5 washers
Spring washers
Washers
Bolts
use M6, M8,
or M10 types
*Use ALC-specific anchors for ALC installation
• Female screw anchor bolts
2 small holes
6 large holes
• Screws for use on concrete
Fix the Baby Keep Slim WA to the wall at four mounting points.
(Refer to “Types of Screws Used for Wall-mounting” on the other side of this instructions)
*Once the screws are in place, make sure the structure
does not shake or wobble.
Screws (
φ
5)
for concrete
Screws (
φ
5)
for concrete, 2
φ
5 washers, 2
φ
6~
φ
10 Washers, 6
φ
6~
φ
10 Spring washers, 6
φ
6~
φ
10 Bolts, 6
Attach the head pad.
(Make sure the correct side is up.)
Test the guard several times
to make sure it opens and
closes appropriately.
WARNING
Stickers must be placed in highly
visible areas. Dangerous actions
such as indicated on the usage
instructions sticker may lead to
injury or serious accidents.
Affix the guide stickers to the restroom entrance
and to the stall doors.
Restroom entrance
Restroom stall
Thoroughly check the Baby Keep Slim WA once it
has been installed. Refer to the Users Manual
“Maintenance Inspection” section. Using the Baby
Keep Slim WA without completely assembling it can
lead to injury or serious accidents.
WARNING
Put stick near the product
Put & stickers on the product.
3
5
6
5
Braille sticker
6
Routine inspection sticker
970mm
110mm
100mm
346mm
(
(
*Anchor bolts must be
placed at least 40mm
into the base.
Installation Instructions
* Hole positions are all center pitch (center-to center) dimensions.
Use an M6, M8, or M10
female type anchor bolt.
Female type anchor bolts, 4
Bottom cover
Parts are
included
1
2
Part is included
3
Part is included
Back
Side
Match the 6 tabs with
the corresponding
square holes on the
backside to attach the
head pad.
*The up arrow on the back
indicates which side is up.
Square holes
Square holes
7
Parts are included
CAUTION
The head pad tabs will
make a clicking sound
when correctly attached.
Note that the tabs may
break if incorrectly
inserted.
133826050 201225
(
1
)