1. Line up the support leg with the upper
plate and push to snap into place as
shown in figure 1. Repeat the process
for the other support leg.
Once assemblied, pull on both support
legs to ensure they are securely locked
in position.
- 3 -
2. Align the support legs, that are now
attached to the upper plate, to the lower
base and push to snap into place as
shown in figure 2.
3. Turn over the lower base and insert all
four globe wheels. Press the screw side
down into the hole until the wheel is fully
inserted as shown in figure 3.
figure 1
figure 2
figure 3
figure 4
4. Align the handrail toy bar with the holes in
the top rear of the upper plate, and press
into place as shown in figure 4. Repeat the
process with the other handrail toy bar.
Assembling the Activity Walker