USER MANUAL FOR RX-8139
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 16
3.3.5 POLE MOUNTING OF MOUNTING RACK
z
The equipment can be mounted on a pole of about 60~75mm in diameter.
z
Insert and tighten the two U bolts to secure the mounting rack onto the pole.
z
The remaining installation to secure the enclosure to the mounting rack is identical to wall mounting.
U Bolt
Pole
Mounting Rack
M8 Hex Socket Bolt
Figure 5: Pole Mounting Overview
3.3.6 DRIP-LOOP
Comba recommends that every horizontal cable entry to the equipment forms a 'U' before its entry to the
equipment. Water on the cable will drip down at the bottom of the loop and will not accumulate at the
equipment connectors.
