4
5
2. Charging of the Band
To charge the device:
1. Connect the charger to a power source.
2. Place the charging socket of the Band on the
magnetic connector of the charger.
a. Charging of the Band is signalled by a flashing
red light and a voice message about charging
the device.
b. When the device is fully charged, the red light
stops flashing and the green light turns on.
When the device is fully charged:
1. Disconnect the charging socket of the Band from
the magnetic connector of the charger.
2. Disconnect the charger from the power source.
3. Turning the Band on
To turn the Band on:
1. Press and hold the green button for 3 seconds.
2. While holding the button, wait until the green light
is on and the tune and voice message are played.
Connector
Charging socket
Light
On/Off Button
