InteliVision 13Touch Global Guide
8
2 System overview
2.1 General description
The new InteliVision 13Touch is a high-quality easy-to-use 13.3" Marine certified Panel PC with multi-controller
support and buttons for brightness regulation on its front face. Even though the software allows to configure up
to 32 controllers the hardware is designed for simultaneous monitoring and control of up to 4 controllers only.
Compatible controllers should be connected via Ethernet, in some cases with use of InternetBridge-NT. USB
ports are recommended not to be used for monitoring.
InteliVision 13Touch is mainly dsigned to communicate over Ethernet interface. InteliVision 13Touch comes
with PC SCADA software enabling users to freely configure their screen with different types of items such as
meters, bar graphs, numeric values, control buttons, pictures, etc. The software allows users to check the
history of multiple controllers and change setpoints from a single location. IGS-LOG software is also
preinstalled at no extra cost for continuous logging of desired parameters. InteliVision 13Touch is designed to
mount on a panel.
Technical data
Power Supply Range
10 - 31 V DC
Power supply
Operating Temperature
-15 °C to 55 °C
Storage Temperature
-20 °C to 60 °C
Vibration
On engine 4grms
Humidity
Up to 95% relative humidity
(non-condensing)
Operating conditions
Rear I/O
2 × USB 2.0
2 × USB 3.0
Ethernet: 2 × RJ45, 10/100/1000 Base-Tx
Interfaces
CPU
Intel Atom® x5-E3930 Processor, 2 MB Cache,
1.30 GHz / 1.80 GHz
Memory
4GB RAM
Storage Device
32 GB eMMC
240 GB SSD
System
LCD panel
13.3" TFT-LCD
Resolution
1920 × 1080 px (FHD)
Luminance
600 cd/m
2
LCD specification