ComAp InteliMains NT IM-NT, Справочное руководство

Страница: 321 / 437

InteliMains
NT
, SW version 3.2.0
InteliMains-NT-MCB-MGCB-3.2.0-Reference Guide.pdf,
©ComAp – April 2015
321
Description This value shows the sum of nominal powers of all gensets that are available
for power management (in any state - stopped, running etc.). See also values
TotRunPnomAll and TotRunPnom .
For more information on power management please refer to the chapter
Power management .
12.1.7.4 Value: TotRunPnom
Group Pwr management
Units kW
Related FW standard v3.1.0
Description This value shows the sum of nominal powers of all running gensets that are
participating in power management. See also values
TotRunPnomAll and
TotAvlbPnom .
For more information on power management please refer to the chapter
Power management .
12.1.7.5 Value: Act Reserve
Group Pwr management
Units -
Related FW standard v3.1.0
Description Actual absolute reserve .
12.1.7.6 Value: LoadRes Start
Group Pwr management
Units kX
Related FW standard v3.1.0
Description If the actual absolute reserve is lower than this value the next gen-set which
is about to be started in
power managament is started. This value is the
exact copy of setpoint #LoadResStrt X .