49
WEEKLY MAINTENANCE
5.
Turn the knobs (2) on the brush head unit, to adjust the height of the side splash guards
During working operation, the side rubber splash guard is slightly but evenly tilted outwards (by about
5mm) along its whole length.
59.
CLEANING THE DETERGENT SOLUTION DISTRIBUTION BASIN
If the detergent solution distribution basin in the brush head unit is clogged with dirt, it will not channel the
detergent solution evenly onto the floor, and so the machine will not clean thoroughly. To clean the basin,
proceed as follows:
1.
Make sure the brush head unit is in its working position (if necessary, turn the I-DRIVE selector to the
“Washing” position to lower the brush head)
2.
Check the electric system connector is disconnected from the battery connector (for battery versions)
or from the generator connector (for versions with a combustion engine)
3.
Make sure the main switch is in the "0" position. If it is not, turn the key a quarter turn to the left
4.
Check the parking brake is engaged. If it is not, engage it by means of the lever (1)
5.
Use a suitable tool to remove the right-hand splash guard pre-assembly (2), loosening the screws (3)
that fix it to the brush head.
WARNING: These operations must be carried out using gloves to protect against
contact with dangerous solutions.
2
3
3
2
1
