Conducted Comb Generator model CGC-255E & CGC-510E
Page 6 of 15
www.com-power.com
Rev. 022020
Important precautions and Maintenance
Precautions
The Conducted Comb Generator is an conducted signal source designed to produces signals
over wide frequency range to verify conducted emissions test setup that utilize Line Impedance
Stabilization Networks. It was designed for use in EMI test laboratory.
Denotes: Read and understand user manual carefully before operating the
equipment.
Maintenance
There are no user serviceable parts inside the unit. User modifications to the Comb Generator
will void warranty. The Comb Generator uses re-chargeable NimH batteries. Call the factory if
the battery needs replacement. Send Comb Generator to authorized Com-Power service center
if needs repair. Please visit our website at
www.com-power.com
to request a return
merchandise authorization number (RMA) before you send the unit in for service.
Battery care and instructions
To avoid any risk of explosion
Replace batteries with the size and type specified in this manual.
Do not dispose of batteries in a fire or trash incinerator, or leave batteries under direct
sunlight.
Do not immerse batteries in water or otherwise get them wet.
Do not charge batteries, that appear to be leaking, discolored, rusty, deformed; emit an
odor
Use only battery charger adapter supplied with the Comb Generator to charge the
batteries.
