Page 6 of 10
INSTRUCTION MANUAL
Preamplifier Model PAM-6000
114 OLINDA DRIVE
●
BREA, CALIFORNIA 92823
●
(714) 528-8800
●
fax (714) 528-1992
●
com-power.com
REV42114
4.0
Warranty
Com-Power warrants to its Customers that the products it manufactures will be free from
defects in materials and workmanship for a
period of 3 years
. This warranty shall not apply to:
Transport damages during shipment from your plant.
Damages due to poor packaging.
Products operated outside their specifications.
Products Improperly maintained or modified.
Consumable items such as fuses, power cords, cables, etc.
Normal wear
Calibration
Products shipped outside the United States without the prior knowlege of Com-
Power.
In addition, Com-Power shall not be obliged to provide service under this warranty to repair
damage resulting from attempts to install, repair, service or modify the instrument by
personnel other than Com-Power service representatives.
Under no circumstances does Com-Power recognize or assume liability for any loss, damage
or expense arising, either directly or indirectly, from the use or handling of this product, or
any inability to use this product seperately or in combination with any other equipment.
When requesting warranty, calibration or repair services, it is recommended that the original
packaging material be used for shipping. Damage due to improper packaging will void
warranty.
In the case of repair or complaint, a label should be attached to the housing of the
instrument which describes briefly the faults observed. Please include the name, telephone
number and email address of the contact person. Please visit our website
and obtain an RMA number by selecting service and completing the online form.
4.1
Maintenance
This product contains no user replaceable parts other than the battery. If the unit does not
operate or needs calibration, please contact Com-Power Corporation. Do not remove the
instrument cover. The batteries can be accessed from the the bottom of the unit if needs
replacement. Any modifications or repairs performed on the unit by anyone other than an
authorized factory trained technician will void warranty.
The exterior surface may be cleaned with mild detergent and then be wiped with a dry, clean,
lint-free cloth. Use care to avoid any liquids or foreign objects entering the chassis.
