Page 7 of 10
INSTRUCTION MANUAL FOR LI-1100
LINE IMPEDANCE STABILIZATION NETWORK (LISN)
19121 El Toro Road, Silverado, California 92676
●
(949) 459-9600
●
com-power.com
REV121014
5.0 Warranty
Com-Power warrants to its Customers that the products it manufactures will be free from
defects in materials and workmanship for a
period of 3 years
. This warranty shall not apply to:
Transport damages during shipment from your plant.
Damages due to poor packaging.
Products operated outside their specifications.
Products Improperly maintained or modified.
Consumable items such as fuses, power cords, cables, etc.
Normal wear
Calibration
Products shipped outside the United States without the prior knowlege of Com-
Power.
In addition, Com-Power shall not be obliged to provide service under this warranty to repair
damage resulting from attempts to install, repair, service or modify the instrument by
personnel other than Com-Power service representatives.
Under no circumstances does Com-Power recognize or assume liability for any loss, damage
or expense arising, either directly or indirectly, from the use or handling of this product, or
any inability to use this product seperately or in combination with any other equipment.
When requesting warranty services, it is recommended that the original packaging material
be used for shipping. Damage due to improper packaging will void warranty.
In the case of repair or complaint, Please visit our website
RMA form (
http://com-power.com/repairservicereq.asp
). Our techincal assistance personnel
will contact you with RMA number. Please ensure to have the RMA number stated on
shipping documents.
5.1
Maintenance
This product contain no user serviceable parts inside. If the unit does not operate or needs
calibration, please contact Com-Power Corporation. Any modifications or repairs performed
on the unit by someone other than an authorized factory trained technician will void
warranty.
The exterior surface may be cleaned with mild detergent and then be wiped with a dry, clean,
lint-free cloth. Use care to avoid liquids or other foreign objects entering the chassis.
