Columbus McKinnon MAGNETEK LaserGuard Mini, Техническое руководство, Страница: 20 / 36

LaserGuard Mini Technical Manual
July 2021
Page 20 of 36
3.3 Mechanical Installation and Alignment
The LaserGuard Mini Collision Avoidance System measures the distance between the laser sensor’s lens
and the reflective target surface.
Make sure the laser is mounted so that no obstructions can come between the laser sensor and the
reflective target.
Determine the mounting position for the laser and the reflective target so that the visual laser point is
centered on the reflective target. Align the laser beam and reflector as perpendicular as possible. This
alignment is the most important part of a successful installation since the laser beam must stay on the
target for the entire range of 8 in.-164 ft (0.2-50 m).
Refer to the figures in this section for mounting information.
3.3.1 Crane to Crane Collision Avoidance
Use the factory-supplied brackets on the festoon side of the crane or on the non-festoon side, depending
on your needs.
See Figure 3-2 on page 20 and Figure 3-3 on page 21 for mounting arrangements.
Figure 3-2: Reflector Mounting Festoon Side