Page 15
CAUTION
•
Inspect the safety belt webbing and hardware periodically. Check for cuts, frays or loose parts. Replace
components if excessive wear or damage is noticed.
•
Keep safety belts clean and dry. To clean, use mild soap and warm water. Do not use bleach, dye or abrasive
cleaners as this will weaken the belt webbing material.
•
Do not insert any foreign objects into the retractor mechanism.
•
Periodically check for smooth operation and replace if the mechanism is not operating properly.
PRE-OPERATING INSPECTION
Each vehicle has been thoroughly inspected by both the manufacturer and dealer. Before the initial
operation, it is important that the user
inspects the vehicle using the following
guidelines:
•
Ensure that all parts are securely fastened to the vehicle, no parts are missing, and all screws or nuts are
properly tightened.
•
Review all warning decals and placement on the vehicle.
•
Safety Belts: visually inspect and test for safe operation.
•
Tires: check for proper inflation as identified on the vehicle certification label.
•
Batteries: check electrolyte level in all of the cells of each battery. If any cell is low, add distilled water as
described in the Battery Care section of this manual.
•
All wires should be free of corrosion.
•
Batteries should be fully charged before first use of vehicle.
•
Brakes - check hydraulic fluid level. If it is low, immediately call a qualified mechanic for service.
•
Charger cord, plug, and receptacle inspect for cracks, loose connections, or frays.
PRE-OPERATION INSPECTION
The following items should be checked daily prior to using the vehicle:
•
Forward/Reverse Switch
- ensure proper operation
•
Brakes
- make sure the brake pedal is operating smoothly. It should not go more than half way to the floor
when depressed. The vehicle should come to a smooth stop when operating. If excessive or low pedal
pressure, pulling to one side, or unusual noise is noticed while braking, have the vehicle serviced
immediately.
•
Reverse Buzzer
- the reverse buzzer should sound when the key is in the on position and the direction is set
to reverse.
•
Steering
- steering should be smooth and consistent with no excessive play in the steering wheel.
•
General
- listen for any unusual noises such as squeaks or rattles. Check the vehicle's ride and
performance. Have a certified Tomberlin Dealer or authorized technician investigate anything
unusual.
Содержание TOMBERLIN E-MERGE E2 Coupe
