6
Battery Installation
Battery Installation
Battery Installation
Battery Installation
Battery Installation
Batteries are not included with your FRS 2-
way radio. To use the radio, you must install 4
AAA size alkaline batteries.
Caution: incorrect positioning of the batteries
can damage both the batteries and the unit.
To install the batteries:
To install the batteries:
To install the batteries:
To install the batteries:
To install the batteries:
•
Remove the belt clip by pulling the
tab on the top of the belt clip back,
and sliding it up and off of the unit.
•
Pull the battery door lock tab down to
release the battery cover.
•
lnsert four AAA batteries. Position the
batteries according to the polarity
markings on the plastic.
•
Replace the battery cover. Snap the
lock tab and belt clip back into place.
connecting the adaptor
connecting the adaptor
connecting the adaptor
connecting the adaptor
connecting the adaptor
To use the unit with an AC/DC Adaptor
rechargeable batteries insert the round
connector (OD 2.5mm) of the 6V DC/
100mA AC/DC adaptor* into the SPK/
MIC/CHG jack on top of the unit.
Note
The unit should be turned OFF in order
to charge the batteries properly.If the
unit is turned ON and placed for
charging the charge current is too low
for the battery to charge up as the unit is
still using power.There is no charge
Setting Up Your FRS Radio
Setting Up Your FRS Radio
Setting Up Your FRS Radio
Setting Up Your FRS Radio
Setting Up Your FRS Radio
Содержание FRS14-SPR
Страница 19: ...1 9 ...
Страница 20: ...2 0 ...