3.3.15 SEAT SWITCH/TRACTION INTERLOCK
– NOT SHOWN
Seat switch/traction interlock requires operator in seat for traction drive operation. A reset traction
controller may be required if operator leaves seats while acceleration foot pedal is depressed.
3.4 VEHICLE OPERATING INSTRUCTIONS
3.4.1 DRIVING THE VEHICLE
Complete the following PRE-OPERATION CHECKLIST.
Insert key, press brake pedal firmly, and turn key to "ON" position.
Switch the direction selector to the direction of desired travel.
Release the parking brake and brake pedal.
Slowly press accelerator pedal to obtain desired vehicle speed.
To slow or stop, remove foot from accelerator and press brake pedal.
3.4.2 PRE-OPERATION CHECKLIST
Should any item malfunction or need adjustment. Do not operate vehicle until the problem has
been corrected.
ITEM
PROCEDURE
Batteries
Fully charged or adequately charged to provide power for duration of
operations.
The AC cord is disconnected from the vehicle.
Electrolyte level in each cell covers the top of cell plates.
(See Section 4.11 if vehicle is equipped with a Single Point Battery
Watering System.)
Batteries are secure and free of corrosion.
All terminals and connections are tight.
Tire Pressure
Inflated to the recommended psi in Section 1.5. Free from damage.
Lights,
Horn
and
Reverse Buzzer
If equipped, turn lights on and make sure they illuminate.
Press horn button to sound horn.
Reverse buzzer operating. (Operator seat must be occupied.)
Brakes
Brake pedal has firm pedal pressure with minimal travel.
Brake light illuminates.
Parking brake has proper engagement and release.
Steering
Responsiveness and absence of excessive free play.
Cargo
Load secured, balanced and not top heavy.
Obstacles
Path of intended travel is free for obstructions.
Labels
All warning and operation labels in place.
Accelerator
Check for smooth operation.
3-5
