Columbia DIGIT SMART, Инструкция по эксплуатации, Страница: 11 / 15

Starting from 30/07/2007
Columbia 11
8. MAINTENANCE AND REPAIR
NOTE: all cleaning operations must be carried out with the battery disconnected from the machine.
Maintenance and repairs must be carried out only by trained personnel. If necessary send the strapping tool, using
original packaging, to the nearest service center.
CLEANING
Use compressed air to eliminate possible residuals of strap from the feedwheel and from the welding group. It is not
necessary to open the machine.
REPLACEMENT OF WORN PARTS
NOTE: When servicing the tool you must first remove the battery.
Feedwheel replacement
§
Unfasten the fixing cover screw
“1”
of the left side of the tool and remove the cover
“2”
§
Unfasten the fixing cover screws of the right side of the tool (n°7
“3”
).
§
Unfasten the fixing cover screws of the left side of the tool (n°2
“4”
) and open the tool
§
Unfasten the fixing cover screw
“5”
of the right side of the tool and remove its nut
“6”
§
Unfasten no.4 screws
“7”
, remove the clip
“8”
, remove the spacer
“9”,
remove the cover
“10”,
remove the bearing
“11”
and replace the feedwheel
“A”
.
TAKE CARE TO THE WIRING.
16