Columbia 11A-A40X897, Руководство оператора

Страница: 21 / 24

21
GDOC-100223CN Rev. A
The outdoor equipment engine owner will not be charged for diagnostic labor that is directly associated with diagnosis of a defec- 6.
tive, emission-related warranted part, provided that such diagnostic work is performed at a warranty station.
MTD Consumer Group Inc is liable for damages to other engine or equipment components proximately caused by a failure under 7.
warranty of any warranted part.
Throughout the off-road engine and equipment warranty period stated above, MTD Consumer Group Inc will maintain a supply of 8.
warranted parts sufficient to meet the expected demand for such parts.
Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without
9.
charge to the owner. Such use will not reduce the warranty obligations of MTD Consumer Group Inc.
Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted
10.
add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claims. MTD Consumer Group Inc
will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified part.
WARRANTED PARTS:
The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty
coverage if MTD Consumer Group Inc demonstrates that the outdoor equipment engine has been abused, neglected, or improperly
maintained, and that such abuse, neglect, or improper maintenance was the direct cause of the need for repair or replacement of the
part. That notwithstanding, any adjustment of a component that has a factory installed, and properly operating, adjustment limiting
device is still eligible for warranty coverage. Further, the coverage under this warranty extends only to parts that were present on the
off-road engine and equipment purchased.
The following emission warranty parts are covered (if applicable):
(1) Fuel Metering System
Cold start enrichment system (soft choke) •
Carburetor and internal parts (or fuel injection system) •
Fuel pump •
Fuel tank •
(2) Air Induction System
Air cleaner •
Intake manifold •
(3) Ignition System
Spark plug(s) •
Magneto ignition system •
(4) Exhaust System
Catalytic converter •
SAI (Reed valve) •
(5) Miscellaneous Items Used in Above System
Vacuum, temperature, position, time sensitive valves and switches •
Connectors and assemblies •
(6) Evaporative Control
Fuel hose •
Fuel hose clamps •
Tethered fuel cap •
Carbon canister •
Vapor lines •
NOTE:
If you require warranty service in Canada and your product was sold by MTD Products Limited within Canada to the retailer
you purchased it from in Canada then the MTD Consumer Group Inc portion of this warranty will be honored by MTD Products
Limited in Canada.