46
Weather Display
__________________________________________________________________________
Columbia Weather Systems, Inc.
3. Locate SD Boot pins, near the SD Card.
4. Place the jumper on both SD Boot pins.
5. Apply power to the Display Console.
6. The screen will be in Recovery Mode and will display the IP
Address of the unit.
7. Connect the Display Console to the network (if the IP address is
compatible) or directly to a computer with a similar IP address
scheme.
8. Browse the IP Address of the unit.
Once in Recovery Mode the user can Upgrade Firmware which will restore
the Display Console if it has become corrupted.
To enter the full Recovery Mode, select "Safe Shutdown", remove power,
remove jumper, apply power to device, then refresh the browser page.
The instructions are also available on the Recovery Mode browser page.
If you require further assistance, please contact Columbia Weather
Systems.
Update Firmware
See the Update Firmware section for more information.
Update Firmware from USB
The firmware can also be upgraded through a USB flash drive. Contact
Columbia Weather Systems for more information.
Restore Factory Settings
In the event a problem occurs with the Display Console the user can enter
Recovery Mode and restore the factory settings by clicking Restore
Factory Settings. This action will revert the unit back to the default IP
address of 192.168.0.50.
Save Device Settings
The user can save the current device settings including network settings,
administrator password, and other device configuration settings by clicking
Save Device Settings then clicking Download Device Settings. The device
settings file will automatically download.
Restore Saved Device Settings
In the event that device configuration settings are inadvertently changed
the device settings file can be uploaded to restore the unit with the saved
