background image

2

COLUMBIA SPECIFICATIONS

1622 Browning   Irvine, CA   92606-4809   Phone: 949.474.0777   Toll Free: 800.626.2117   Fax: 949.474.1191   www.columbiasinks.com   email: [email protected]

©2019 Columbia Products

WALL MOUNTED SINKS

Tools Required

 Tape Measure
 Adjustable Wrench
 Drill Motor and Drill Bits
 Pipe Wrench
 Level
 Safety Glasses
 Screw Drivers: 1 Phillips & 1 Standard
 Pencil
 Socket Wrench

Illustration A

Illustration B

Installation Instructions

Step 1

1. Establish sink location on the wall.
2.  Measure a recommended 41.5” from finished floor and draw a level line which will be the top 

edge of the wall mounting bracket.

3.  Hold the wall mounting bracket against the wall and mark the wall where the holes are. Drill holes 

and secure bracket to the wall as shown in illustration A. Screws are not provided.

Step 2

1.  Install faucet assembly to the sink using the faucet mounting kit model SMK.
2. Install strainer assembly at the drain hole.
3. Connect hot and cold water supply (not included) to the faucet.

Step 3

1. Position the sink onto wall bracket.
2. Mark holes for fastening side mounting brackets as shown in illustration B.
3. Remove sink from the wall bracket.
4. Drill holes in wall for securing sink to wall.
5. Hang sink on the wall bracket and secure to the wall.

Step 4

1. Connect waste line or drain pipe to the strainer assembly.
2. Connect hot and cold water supply lines to the water source.
3. Remove aerator from the spout and flush water system.
4. Check connections for leaks.
5. Replace aerator onto the spout.

Parts List

 (1) Wall mount sink
 (1) 8” on center faucet 
 (1) Faucet mounting kit
 (1)  Wall-mounting bracket 
 (2)  Support brackets
 (1) Strainer assembly with basket

Trouble Shooting Guide

Problem

Possible Cause

To Diagnose

Remedy

Water drips from the 

spout or from under 

the lever.

1. Seat washer is worn 

2. Seat is worn 

3. O-rings are worn

Shut cold water source off. See if water still leaks from the spout. 

If leaks continues repair hot side if not repair cold side.

Recommend installing hot or cold 

faucet repair kit.

WARNING:

 This product can expose you to chemicals including Chromium (hexavalent compounds), 

Lead, and Phthalates (DEHP) which are known to the State of California to cause cancer and birth defects 
or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov

.

NOTE

Lead content originates from Brass components in valves and faucets and is certified under 

NSF/ANSI 372 as containing less than 0.25% lead in wetted surfaces.

Notice for California Consumers

Отзывы: