CRN2
WET LOCATION HIGH BAY
CRN2 Remote Instruction Manual
currentlighting.com/columbialighting
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Page 5 of 5
Rev 01/06/23
COL_CRN2_LSCS EM Battery_inst_R01
MOUNTING DIAGRAMS
INSTRUCTIONS FOR REMOTE CONTROL
DIMENSIONS
G-hook Ring Bolt
M10-Rod M12-Rod
Hollow Pole
Hollow Pole
Ring Bolt
Rings
Type A Pole Mount
See instruction manual for typical installation and select appropriate mounting method.
Press the ON button to test emergency function. This light will switch to its emergency lighting mode and the
indicator will turn off.
Press the OFF button, the light will revert to normal lighting mode.
When main power supply is off (emergency mode), press the off button to turn off the emergency function.
Type B Pole Mount
Type C Ring Mount
Test Switch & Indicator
RED ON: Charging mode
RED OFF: Discharging mode
Note: remote controller must be pointed at the indicator light and be
within 45° angle to receive signal.
Remote controller needs two AAA batteries to operate (not included)
273.26mm