Colours CHUMP, Руководство пользователя

Страница: 19 / 23

Colours
Air Ride System Owner’s Manual
▶
Air Ride System Maintenance and Air pressure
○
!
To keep your air ride system in optimal working condition,
You should check the air pressure at least once a month.
Use the Fox High Pressure Pump, as shown below.
The pump is used to add and release air pressure from your FLOAT SHOCKS
▶
To Pressurize Your Shock:
1. Locate and Remove the air valve cap from the shock
2.
Thread the pump’s valve chuck onto the shock’s air valve until pressure registers on the pump
gauge. This takes approximately 6 turns - Do not over-tighten pump on air valve as this will
damage the pump chuck seal.
*If the shock has no air pressure, the
gauge will read zero.
17/ OWNER’S MANUAL