ColorVerge MiniPar 54 Скачать руководство пользователя страница 11

CONTROL FUNCTIONS in detail

 

(continued)

FADE

  FADE COLOR CHANGE 

Use this mode to create a revolving rainbow of colors effect.

¤

 To enter this mode, press 

MENU

,  then press 

UP 

or 

DOWN 

until you see

 

FADE

,

 

press

 ESC. 

Then

 

press 

UP 

or 

DOWN

 until you reach the desired value for this mode. Value 00 is the slowest 

color fade, value 12 is the fastest color fade.

ACS-

  AUTO SHIFT COLOR 

(pulse) 

Use this mode to create a revolving color effect that pulses 7 colors (red, green, blue, yellow, 

magenta, cyan white).

¤

 To enter this mode, press 

MENU

,  then press 

UP 

or 

DOWN 

until you see

 

ACS-

,

 

press

 ESC. 

Then

 

press 

UP 

or 

DOWN

 until you reach the desired value for this mode. Value 00 is the slowest 

pulse mode, value 12 is the fastest.

SO-1

  SOUND ACTIVATE 1  

(3 color)

The internal microphone activates color changes (red, green, blue) based on sound.  This is an 

excellent mode to use if you do not have a DMX controller and wish to get an interactive 

response from the fixture. Bass frequencies offer the best results. 

¤

 To enter this mode, press 

MENU

,  then press 

UP 

or 

DOWN 

until you see

 

SO-1

,

 

press

 ESC.

 

The display will now read 

SOU1

. There are no value settings for this mode.

SO-2

  SOUND ACTIVATE 2  

(7 color) 

The internal microphone activates color changes (red, green, blue, yellow, magenta, cyan white)  

based on sound.  This is an excellent mode to use if you do not have a DMX controller and wish 

to get an interactive response from the fixture. Bass frequencies offer the best results. 

¤

 To enter this mode, press 

MENU

,  then press 

UP 

or 

DOWN 

until you see

 

SO-1

,

 

press

 ESC.

 

The display will now read 

SOU2

.There are no value settings for this mode.

SLA-

  SLAVE

 

This mode allow you to slave multiple lights from one master light. The result is all lights 

perform the same action in sync. 

¤

 To enter this mode, press 

MENU

,  then press 

UP 

or 

DOWN 

until you see

 

SLA-

,

 

press

 ESC.

 

The display will now read 

SLAE

. There are no value settings for this mode.

Note: Please review the next section “

MASTER/SLAVE MODE

” for more information.

11.

Copyright 2010 - 2012  Colorverge™ Lighting - colorverge.com

Содержание MiniPar 54



















Отзывы: