Colortronic CTT 250 Скачать руководство пользователя страница 16

Страница: 16 / 93

3. Start-up

This chapter is directed at the operators of the equipment.

This chapter assumes general skills in dealing with drying systems and SPS
(PLC) control units.

This chapter assumes that the functional description has been read and un-
derstood.

It should be ensured in each and every case that the operators have the rele-
vant skills.

Note down all set values of the control system.

Make sure that the cooling appliance is connected to the mains socket in
the electrical cabinet (if present, optional).

Make sure that any condensate penetrating from the cooling appliance
(optional) does not get inside the dryer or the control box.

If the inside temperature of the switch cabinet is above +50°C (122 °F),
the dryer is switched off after 30 minutes if it is operated with a cooling
appliance (optional).

If ordered temperature can be displayed in °F !

64.10-0260GB05

06/03

CTT 250

Start-up 3-1

Содержание CTT 250






























































































Результаты поиска

Содержание CTT 250

Отзывы:

Бренды по названию

Популярные бренды

Colortronic CTT 250, Руководство по эксплуатации

Результаты поиска

Содержание CTT 250

Отзывы:

Бренды по названию

Популярные бренды