Coloronix SS2 -RGBW-18L, Руководство пользователя

Страница: 5 / 9

Pag e 5 of 9 - Coloronix SS2 - RGBW- 18L Direct Power L ighting Manual V.1.0 .1
Pre - Programmed Mode (Static Color)
1. Press “MODE”
，
enter the mode “Prxx”
2. Enter Pr.01
3. Press “SETUP” and toggle between static color to achieve desired show
No. Color
1 Red
2 Lime Green
3 RGBW
4 Green
5 Light Blue
6
Blue
7 Purple
8 Magenta
9 Bright White
10 Pink
11 Light Green
12 Light Purple
13 Orange
14 RGBW
Pre - Programmed Mode (Show Mode)
Pr.01 Static color p rogram
Pr.02 Four colors fading
Pr.03 Ten color fading
Pr.04 Four color dream
Pr.05 Four color hopping
Pr.06 Ten color hopping
Pr.07 Red fading
Pr.08 Green fading
Pr.09 Blue fading
Pr.10 White fading
Mounting and Alignment of Fixture
Mounting and Alignment of Fixture Mounting and Alignment of Fixture
Mounting and Alignment of Fixture
•
Mount and secure each fixture into the designated position in accordance to the
installation plan. Ensure there is sufficient cable length between the fixture and junction
box to allow for final alignment of the fixture.
• Secure the fixtures to a solid mounting surface using three threaded fasteners minimum
of 3/8 inch (10mm) stainless steel complete with flat and locking washer.
•
Rotate the fixtures using tilt method into the desired position.