3
www.colormetrics.info
Colormetrics P1300
SAFETY INSTRUCTIONS
1. Read these instructions carefully. Keep these instructions for future reference.
2. Please disconnect this device from AC outlet before cleaning. Do not use liquid or spray
detergent for cleaning. Use moisture sheet or cloth for cleaning.
3. Please keep your device safe from high levels of humidity.
4. Install the device and its driver on a surface plate. Any tilt plate might cause damage.
5. Do not place anything over the power cord. And avoid people from stepping on it
6. Please be aware cautious note or warnings on the device.
7. If the device will not be used for a long time, please unplug the power cord to avoid damages
by transient overvoltage.
8. Never pour any liquid into the device; this could cause fire or electrical shock.
9. If one of the following situations happens, get the device checked by a service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the device.
c. The device has been exposed to moisture.
d. The device does not work well or you cannot get it work according to user manual.
e. The device has dropped and damaged.
10. Do not leave this device in an environment unconditioned, storage temperature below -20°C or
above 60°C, it may damage the device.
11. Unplug the power cord when doing any service or adding optional kits.
Lithium Battery Caution:
1. 1. Danger of explosion can happen if the battery is incorrectly replaced. Replace only the
original or equivalent type recommended by the manufacture. Dispose used batteries
according to the manufacture’s instructions.
2. Do not remove the cover, and ensure no user serviceable components are inside. Take the unit
to the service center for service and repair.
