Colorjet VerveLED VLR 2513, Инструкция по установке и устранению неисправностей

Страница: 14 / 49

Page | 13 Verve LED
Print Head Configuration
When we open the Print Control Center, 1190 error appears on the screen. To remove this error, the
desired head configuration has to be selected. To select the head configuration settings, click on the
Maintenance
→
Voltag e path, the following screen appears as shown below:
Fig 8: Setting the Print Head Configuration
Note: Before setting print head configuration, service engineer has to provide the password in the user
login screen.
Follow these steps to configure print head:
Step 1: Select the desired option as per ink from the Print Head Configuration list box.
Step 2: Click on the Load Configuration button.
Step 3: Click on the Apply button to apply the settings.
Now, print heads get configured.
To open the Print Control Center screen, double-click on the Print Control Center icon at desktop. The
Print Control Center screen appears as shown below:
Fig 9: Displaying the User Interface of Print Control Centre