Copyright (C) ATBS Technology Co. R2.0
版權所有請勿翻印
7. Alarm Mode:
Backlight color turns to red once abnormal events
detected.
For example when the alarm pre-set threshold were set
as: low pressure threshold is 25.5 psi, high pressure
threshold is 45.5 psi, and high temperature threshold is
65
℃
.
7.1 represents that Front Left tyre pressure was 12 psi,
which was too low (<25.5psi)
7.2 Indicates Front Left tyre temperature is 68.0
℃,
which
was higher than high temperature threshold.
8. Setting Mode:
There are three thresholds can be adjusted to fit for
individual user requirements. They are High temperature
threshold, High pressure threshold, and Low pressure
threshold. The backlight color can be adjusted also.
8.1 High temperature threshold setting:
Press for 5 seconds to enter this setting mode,
backlight color turns to blue and digits flash.
Degrees of setting temperature in both Centigrade and
Fahrenheit are shown in the same time. High
temperature threshold of each individual tyre can be
set independently with the following procedure: First,
setting Front Left (FL) tyre high temperature threshold,
and then Front Right (FR), Rear Right (RR), Rear Left
( RL) tyre.
Keypad function:
: - 1.
: + 1.
: Save and go to next tyre. After rear tyre saved
system quit from setting mode automatically.
Example: Fahrenheit temperature.
Setting High temperature threshold to 176
℉
5sec
5sec
5sec
5sec
+
+
+
+1111 ℉
SAVE
SAVE
SAVE
SAVE
----1111 ℉
C
C
C
Continue next tyre (
ontinue next tyre (
ontinue next tyre (
ontinue next tyre ( FL
FL
FL
FL---->FR
>FR
>FR
>FR---->RR
>RR
>RR
>RR---->RL
>RL
>RL
>RL---->
>
>
>EXIT
EXIT
EXIT
EXIT).
).
).
).
The original unit of temperature is Centigrade.
Setting High temperature threshold to 80
℃
5sec
5sec
5sec
5sec
+
+
+
+1111 ℃
SAVE
SAVE
SAVE
SAVE
----1111 ℃
C
C
C
Continue next tyre (
ontinue next tyre (
ontinue next tyre (
ontinue next tyre ( FL
FL
FL
FL---->FR
>FR
>FR
>FR---->RR
>RR
>RR
>RR---->RL
>RL
>RL
>RL---->
>
>
>EXIT
EXIT
EXIT
EXIT).
).
).
).
8.2 Pressure thresholds setting:
Press 5 seconds to enter this setting mode,
backlight turns to blue color and digits flash.
Pressure thresholds will adjust in order of:
High Pressure: Front Left
Front Right
Rear
Right
Rear left
