Copyright (C) ATBS Technology Co. R2.0
版權所有請勿翻印
Colorful TPMS LM6040 User Guide
1. Introduction
This Tire Pressure Monitoring System (TPMS) was
designed for increasing security, reliability, and
understanding on tire conditions of your car. Once you
properly install the TPMS, these sensors will
automatically monitor pressures and temperatures of tires
in real time, and send these data to display through
wireless communications. When there is any abnormal
pressure (under or over inflated) and/or temperature of
tire detected, the LCM display will alert driver immediately
through both flash light and voices alarm. This system
could ensure you are driving in safety.
About This Manual
The information in this manual is subject to change
without notice.
This manual has been created with extra care. In
case that you have any comments or questions
regarding this manual, please contact your local
dealer or our Customer Service Center.
Before operating this set, please fully understand
the prerequisite such as specifications or
constraints of the hardware and software. We are
not responsible and have no liability for any loss,
damage or injury as a result of misuse.
All other products and company names used in this
manual are trademarks or registered trademarks of
their respective owners.
2. Check Accessories
Part
Photo
Qty
LCM display
1
Power Cord &
adaptor
(12 to 5V)
1
Fixture: fix
display at air
condition outlet
1
AT68 sensor
4
Lock Nut
Refer to 3.2.3
4
Tool
Refer to 3.2.3
1
User Guide
1
3. Installation
3.1 Install LCM Display
：
：
：
：
3.1.1 Plug in USB adaptor and power on display
.
3.1.2 Plug the Mini USB connecter in display.
3.1.3 Use fixture to fix LCM display.
Set fixture at air outlet
Fix LCM display
3.2 Install AT68 Sensor:
3.2.1
Install battery into sensor and tighten
sensor top cap:
Note: Be sure that the battery polarity was correct.
3.2.2 Check Sensor location:
FL: Front Left tyre, FR: Front Right Tyre
RL: Rear Left tyre, RR: Rear Right Tyre
3.2.3 Remove original valve cap and screw (1) lock nut
first then (2) sensor onto valve stem.
