www.colordreamer.com
Email:[email protected]
Version:V1.0 May 2021
Thank you for purchasing the Colordreamer DMX Pixel Board
Our manual will describe the installation and mounting of the product as well as a descriptio
n of how to use it.
Please read and understand this manual in its entirety before using the product.
Product Warranty is void if product is not installed as per installation instructions and in
compliance with all local and provincial codes.
SAFETY RECOMMENDATIONS AND WARNINGS
Do not handle except at a static free workstation or wearing anti-static wrist strap
Do not make modifications or alter the product
Keep away from flammable material.
Dot not use products if cable or connector are damaged
Dot not drop, knock or shake the products. Rough handing can damage the electronics.
Do not use any silicone or other chemicals on outside surface.
Do not use chemicals or abrasives to clean the luminaires as this many voids the warranty.
Ensure installation complies with local electrical rules and regulations.
Ensure mains input power is surge protected
Do not connect or disconnect the luminaire while the power is connected.
Connectors are to be kept clean and dry at all times.
Input Voltage range 15-24VDC
Colordreamer Products are cooled by convection. Provide adequate ventilation by providing
free air flow around.
If the ambient temperature around the luminaires exceeds 55degrees, do not use the
products and turn off the system.
Power off the luminaires during service or when not in use.
For best color mixing results, ensure the boards have the same orientation.
Product Overview
The Colordreamer DP250/DP300 LED Pixel Board features 36 individually controllable SMD
LEDs on a 6 X 6 matrix with 41.66mm or 50mm pitch. Size 250X250mm or 300X300mm
available.