Figure C
Reconnect DMD Ground Cables
PWR
AUX
DMD_IN
USB Port
Figure B
Stern
Mounting
Holes
Stern
Mounting
Holes
LAMP_IN
(Not used for
Stern Installations)
DO NOT CONNECT
HIGH VOLTAGE TO
THIS CONNECTOR!
Display Controller
Board mounted
to ColorDMD
RF Shield with metallic
side facing down
WARNING - ELECTRIC SHOCK
To protect against electrical shock,
ground wire from the backbox must
be connected to this metal bracket.
ALL RIGHTS RESERVED - PATENT PENDING - COPYRIGHT 2013 - COLORDMD DISPLAYS LLC
Position the ColorDMD face down (centered in the orientation
shown in Fig. C) on the speaker panel and align the four Stern
mounting holes (see Fig. B).
Remove the protective film from the front side of the new
ColorDMD display.
Use the four included ColorDMD mounting screws to fasten the
ColorDMD display to the speaker panel.
Make sure to reconnect
the DMD Ground Cables to ColorDMD
(see Fig. C).
5
6
8
STEP
STEP
STEP
!
WARNING
.
Electric Shock Hazard
- To protect against
accidental electric shock,
DO NOT
operate the game without
ensuring that the ColorDMD metal bracket is electrically grounded.
Ensure the RF Shield (if present) remains under the
Display Controller Board with metallic side facing down
.
Using the 4 screws supplied in the ColorDMD mounting bracket,
fasten the Display Controller Board to the ColorDMD in the
orientation shown in Fig. B.
STEP
7
