Colorbeam Coloray Line 48II, Руководство пользователя

Страница: 5 / 7

4
2. Fixed color
Fixed color: there are 20 built-in fixed colors in the CD-65II
Press
Menu.
The display shows C01
Press
up
and
down
to select the desired color from C01~C20
3. Fade program
Fade program: there are 9 built-in fade programs in the CD-65II
Press
Menu.
the display shows F01
Press
up
and
down
to select the desired program from F01~F09
The fade time of program can be changed from 01~99%(0.5~50sec).
E.g:F03 is running. The fade time can be change by press menu and hold for 3 sec.
The display will show S---- The fade time can be adjusted to 01~99% .by press
Up and down and press Menu again to confirm.
4. DMX Mode setting : the following mode can be selected by press menu to confirm it.
Press
Menu.
the display shows S---
Press
up
and
down
to select the desired program from S01~S41
Press menu again to confirm it.
S10: Control all of LED fixtures in the same channel (default).
S11: Control all of LED fixtures independently
S20: Master off (default).
S21: Master
S30: RGB 3 channels (default).
S31: RGB dimming, strobe 5 channels
S40: Delay off (default).
S41: Delay on
NOTE: the function of delay on is designed for running slow, and free-fliker program.
The response speed of LEDs is slower than normal.
All drivers must be set on the same mode( delay on or off) as connecting
together ,otherwise, the program does not run synchronously.
The slave drivers must be set
add. 001 when running Master/Slave function.
1.DMX add. Setting
5. OPERATION
001 001
C01 C01
F01 F01
S- S-
Me nu
Add.
Color
Fade
Set
--
Menu Menu
Up Up
Down Down
DMX Address: press
Menu.
the display shows the initial DMX address.
Press
up
and
down
to select the desired address from 001-512