4
5. Operating your water dispenser
This water cooler features two easy-to-use push buttoins.
1. The right button supplies cold water ranging from 5 °C ~ 10 °C.
2. The left button supplies hot water ranging from 78 °C ~ 85 °C. To activate, push
the safety catch to the left and press the button located on the top of the unit.
3. The front panel has three indicator lights to indicate the power, heating and
cooling systems are on. The green light indicates the power is on. The red light
indicates that the heating system is on. The blue light indicates that the cooling
system is on. The green light should remain on at all times. The red and blue
lights will go off when the system cycles off, and the water has reached the
appropriate temperature.
4. Your unit’s hot and cold water settings have been set at the factory (cold 5 °C ~
10 °C, hot 78 °C ~ 85 °C). If you wish to adjust the cold water setting, you may do
so simply by inserting a small, flathead screwdriver into the screw located at the
cold water temperature setting located at the back of the cooler. Begin by adjusting
in 1/8 turn increments. Clockwise to INCREASE cold and counter-clockwise to
DECREASE cold.
5. Before using the water dispenser for the first time, you should execute an
internal cleaning, by filling it with 5 liters if water and then drain it by pressing the
hot and cold water buttons, in order to clean its internal tubes.
Circuit Diagram
